Are you using conductive materials that are subject to forces, vibrations, voltages, leading to defects? Or do you expect corrosion? Vinçotte helps you do everything required for the inspection of your conductive parts.
Thanks to these various inspections, various targets can be achieved: the detection of defects in the surface or near the surface, the sorting of materials and derivatives, thickness measurement of non-magnetic materials, thickness measurement of covering layers (cladding), etc.
As regards the detection of defects close to the surface, the eddy current penetration depth and therefore the testing depth directly depends on the electrical and magnetic properties of the material to be tested (from a few hundred microns for steel, to a few millimetres for aluminium), and also on the excitation coil frequency.
The various tests with eddy currents can be carried out using various techniques: the tests can be carried out manually, semi-automatically or fully automatically (through which an accurate mapping of any indications can be made).
Examples
This service offers you the following benefits:
Vinçotte can also carry out advanced, tailor-made checks, in which connection, the equipment if any required can also be developed (scanner and probes), and specific procedures can also be implemented.
The development and production activities are covered under our ISO 17020 and ISO 17025 accreditations. Thereafter, work can be done in accordance with all international standards.
EN ISO 17643 (old EN 1711), EN ISO 2360, ASME V, etc.
This service can be applied in various sectors:
Ask your question directly to the specialised team within your sector.